There are two types of zebra patterns and you can display both simultaneously. The aspect ratio marker will not be displayed when the marker's ratio (including custom ratios) matches that of the resolution set in the video configuration.ĭisplaying Zebra Patterns The camera has a zebra pattern function that shows black and white diagonal stripes over areas that are overexposed.Select, select the desired percentage and then press SET.To calculate the safe area as a percentage of an aspect ratio marker (), select an aspect ratio marker in advance and perform the procedure from the beginning. If an aspect marker is not selected, the safe area will be calculated as a percentage of the whole image () and you can only select the percentage (step 2). Set the desired aspect ratio using the keyboard screen.If you selected, continue the procedure to set the desired aspect ratio. If you selected one of the preset aspect ratios, the rest of the procedure is not necessary.Select, select the desired option and then press SET.You can select the core area used as the basis for calculating the safe area and a percentage (,, or ), relative to that core area.ĭisplays a marker that indicates the area covered by the sub recording. If you selected or, select the desired safe area or aspect ratio with the following procedures.ĭisplays a small marker that indicates the center of the frame.ĭisplays a horizontal line to help you compose level shots.ĭisplays a grid that allows you to frame your shots correctly (horizontally and vertically).ĭisplays markers that indicate various aspect ratios to help you keep your shot within that area.Īvailable options for are, ,, ,, ,, ,, ,, and, a free aspect ratio set by the user.ĭisplays indicators that show various safe areas, such as the action safe area and text safe area.You can display multiple markers simultaneously.Select to turn off the selected marker.Select a marker you wish to display, select the desired marker color and then press SET.Select instead to not display the onscreen markers on the respective video outputs. Onscreen markers are activated on all video outputs by default.Alternatively, you can press an assignable button set to (optional viewfinder only), (external monitors only) or (all monitoring devices at once).Select and/or, select and then press SET.You can display multiple onscreen markers simultaneously. To set the Zebra function, check the following.The camera offers 6 types of onscreen markers. Manuals are posted on your model support page. For further details, check the instruction guide that came with the product. Not all cameras have the Zebra Pattern function.IRE is the measure of the video signal level that is used as the basis of brightness. The Zebra Pattern will appear over the part of an image if the brightness level exceeds the Institute of Radio Engineers (IRE) that you set (IRE level can be set between 70 to 100).If the maximum brightness that can be expressed in shooting is defined as 100, use the Zebra function to check the amount of brightness to which the subject has been exposed. It is a function that aids exposure by showing a striped pattern over areas that are close to overexposure. Zebra Pattern is a camera feature that overlays some stripes into the image that indicate exposure levels. It does not control exposure but just warns you that your highlights are blown out. IMPORTANT: The Zebra Pattern is a highlight warning indicator that is common in video cameras.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |